PIC16F630-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F630 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F630-E/ST Overview
To save space, it is included in the 14-TSSOP (0.173, 4.40mm Width) package. Surface Mount is used for mounting. It comes in the package?of a Tube. Device with PIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~125°C TA. FLASH is its program memory type. A total of 12 I/Os are present. It has a base part number of PIC16F630 that can be used to find other components that are comparable. The terminals of this device are set to DUAL. Currently, it consists of 14 terminationals. In the PIC? 16F series, this electrical component is found. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 14 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. A total of 14 pins are attached to it. It falls under the category of Microcontrollers. In order to store data and programs, the devices have a memory size of 1.8kB. Powered by a 5V source. At a frequency of 20MHz, it exhibits excellent efficiency. A total of 2 timers/counters are present. PIC CPUs are included in this part. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. An oscillator of type Internal is used.
PIC16F630-E/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F630-E/ST Applications
There are a lot of Microchip Technology PIC16F630-E/ST Microcontroller applications.
- Telephone sets
- Binding machines
- Accu-check
- Oscilloscopes
- Equipment control
- Microwave ovens
- Heart rate monitors
- Radio
- Graphic terminals
- Aerospace navigation systems
