PIC16F630-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F630 |
| Pin Count | 16 |
| JESD-30 Code | S-XQCC-N16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| Screening Level | TS 16949 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F630-I/ML Overview
Due to its space-saving qualities, it is available in the 16-VQFN Exposed Pad package. It is mounted using the way of Surface Mount. A package of Tube contains it. The device has a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. There are 12 I/Os on it. A comparable component can be found by using the base part number PIC16F630. A QUAD position is assigned to its terminals. It has 16 terminationals. It is a member of the PIC? 16F series of electrical components. Because the supply voltage is 5V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 14 pins are used. It is mounted based on the method of Surface Mount. It has a total of 16 pins on it. A device with a memory size of 1.8kB can store programs and data. This device achieves excellent efficiency at frequencies of 20MHz. A total of 2 timers/counters have been set up. Normally, the supply voltage (Vsup) should remain above 4.5V. The oscillator type Internal is used to operate the device.
PIC16F630-I/ML Features
16-VQFN Exposed Pad package
Mounting type of Surface Mount
PIC16F630-I/ML Applications
There are a lot of Microchip Technology PIC16F630-I/ML Microcontroller applications.
- Calculators
- Heart rate monitors
- Nintendo
- Automatic staplers
- Teletext terminals
- Glucose monitoring systems (for Type 1 Diabetes)
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Tape drives
- Xbox
- Microwave ovens
