PIC16F630-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F630 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| Nominal Supply Current | 100μA |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| Address Bus Width | 8b |
| Density | 14 kb |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of UART Channels | 1 |
| Height | 4.953mm |
| Length | 19.69mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F630-I/P Overview
For the purpose of saving space, it is available in the 14-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. It comes in the package?of a Tube. It is equipped with a PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. The device has 12 I/Os. A component with the same part number as PIC16F630 can be compared to other similar components. At DUAL, its terminals are located. This circuit consists of 14 terminationals. This electrical component is part of the PIC? 16F series. Using the 5V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A number of 14 pins are used to construct it. During the mounting process, the device is mounted based on the Through Hole method. In total, it has 14 pins. Subcategory Microcontrollers includes this component. A device with a memory size of 1.8kB can store programs and data. At a frequency of 20MHz, it can achieve excellent efficiency. 2 timer/counters are present. PIC CPUs are included in this part. Normal operation requires a supply voltage (Vsup) above 4.5V. Using an oscillator type of Internal, it works.
PIC16F630-I/P Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F630-I/P Applications
There are a lot of Microchip Technology PIC16F630-I/P Microcontroller applications.
- Microwave ovens
- Fire detection & safety devices
- Telephone sets
- Nintendo
- Computer/laptop
- Fabric
- Projector
- Laminators
- Information appliances (networking of household appliances)
- Blood pressure monitors
