PIC16F631-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F631 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Memory Size | 1.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 17 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F631-E/ML Overview
As a result, it is available in the 20-VFQFN Exposed Pad package. Surface Mount is the way to mount it. This item can be found in package Tube. PIC core processor is present on the device. In order to work effectively, the temperature should be kept at -40°C~125°C TA. FLASH has been assigned to it as a program memory. 18 I/Os can be found on it. Based on the PIC16F631 base part number, it can be compared with other components. QUAD is the location of its terminals. Currently, it consists of 20 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 5V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 20 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. A total of 20 pins are attached to it. It falls under the category of Microcontrollers. A device with a memory size of 1.5kB can store programs and data. It is highly efficient when it works at a frequency of 20MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. A total of 2 timers/counters are present. It belongs to the PIC CPU family. 17 is the number of programmable I/O. There is an oscillator type Internal used in this circuit.
PIC16F631-E/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F631-E/ML Applications
There are a lot of Microchip Technology PIC16F631-E/ML Microcontroller applications.
- Broadband technology, video and voice processing
- Electronic jamming systems
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Toasters
- Smoke alarms
- Playstation
- Air fryers
- Radio
- Guidance-GPS
- Computer/laptop
