PIC16F636-E/P
| Parameters | |
|---|---|
| Published | 2005 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F636 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, SPI, USB |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 12 |
| Height Seated (Max) | 5.334mm |
| Length | 19.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
PIC16F636-E/P Overview
Due to its space-saving qualities, it is available in the 14-DIP (0.300, 7.62mm) package. Through Hole is the way to mount it. It is available in the Tube package. Device with PIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~125°C TA. FLASH has been assigned to it as a program memory. 11 I/Os are present on the device. A comparable component can be found by using the base part number PIC16F636. At DUAL, its terminals are located. It has 14 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 14 pins are used. Based on the Through Hole method, it is mounted. This device has a total of 14 pins. It belongs to the subcategory Microcontrollers. A device with a memory size of 3.5kB can store programs and data. It performs extremely well at a frequency of 20MHz. There are currently 2 timers/counters set up on the system. The part is a part of the PIC CPU family. The number of programmable inputs and outputs is 12. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. An oscillator type Internal is required for it to work.
PIC16F636-E/P Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F636-E/P Applications
There are a lot of Microchip Technology PIC16F636-E/P Microcontroller applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Coffee machines
- Security systems
- Medical instruments chromatographs
- Television
- Keyboards
- Printers
- Electronic jamming systems
- Smoke alarms
- Safety -airbags, automatic braking system (ABS)
