PIC16F636T-I/ST
| Parameters | |
|---|---|
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F636 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, SPI, USB |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 12 |
PIC16F636T-I/ST Overview
A space-saving advantage is that it is included in the 14-TSSOP (0.173, 4.40mm Width) package. Mounted using Surface Mount. You can find it in the package of Tape & Reel (TR). A PIC core processor powers the device. During work, the temperature should remain at -40°C~85°C TA. FLASH has been assigned to it as a program memory. It has a number of 11I/Os. A comparable component can be found by using the base part number PIC16F636. At DUAL, its terminals are located. A 14 termination is contained within it. In the PIC? 16F series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed with 14 pins. This mount is done in accordance with the method of Surface Mount. On it, there are 14 pins. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 3.5kB. Working at a frequency of 20MHz results in excellent efficiency. There are 2 timers/counters. This part is an integral part of the PIC CPU family. There are 12 programmable I/Os in the device. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Using a Internal oscillator type, it works well.
PIC16F636T-I/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F636T-I/ST Applications
There are a lot of Microchip Technology PIC16F636T-I/ST Microcontroller applications.
- Scanners
- Ipod
- Glucose monitoring systems (for Type 1 Diabetes)
- Smart highways (navigation, traffic control, information monitoring and car service)
- Vacuum cleaners
- Gas monitoring systems
- Nintendo
- Computer/laptop
- Torpedo guidance
- Christmas lights
