PIC16F648A-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F648A |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Density | 56 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of PWM Channels | 1 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F648A-I/ML Overview
Due to the benefits of saving space, it is available in the 28-VQFN Exposed Pad package. A Surface Mount mounting method is used. In the package Tube, it is included. With a processor of PIC cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. The device has 16 I/Os. A comparable component can be found by using the base part number PIC16F648A. A QUAD position is assigned to its terminals. In this case, there are 28 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. There are 28 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. There are a total of 28 pins on it. Microcontrollers contains this component. In order to store data and programs, the devices have a memory size of 7kB. It is highly efficient when it works at a frequency of 20MHz. A total of 3 timers/counters are present. The part is a part of the PIC CPU family. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Using an oscillator type of Internal, it works.
PIC16F648A-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F648A-I/ML Applications
There are a lot of Microchip Technology PIC16F648A-I/ML Microcontroller applications.
- Process control devices
- Virtual reality VR robots
- Medical instruments chromatographs
- Calculators
- Dryers
- DCS control intelligent sensor
- Fire alarms
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Laminators
- Process control devices
