PIC16F648AT-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F648A |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F648AT-E/ML Overview
For the purpose of saving space, it is available in the 28-VQFN Exposed Pad package. Surface Mount is the way to mount it. Package Tape & Reel (TR) contains it. A core processor of PIC is present in the device. Working at -40°C~125°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. 16 I/Os have been provided by the device. A comparable component can be found by using the base part number PIC16F648A. This device has terminals at QUAD. It consists of 28 terminationals. An electrical component such as this is included in the series PIC? 16F. High efficiency is possible due to the 5V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 28 pins are required to construct this device. As a result, it is mounted in accordance with Surface Mount. On it, there are 28 pins. In the subcategory of Microcontrollers, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 7kB. Working at a frequency of 20MHz results in excellent efficiency. There are currently 3 timers/counters set up on the system. It is part of the PIC CPU family. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. Using an oscillator type Internal, it operates.
PIC16F648AT-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F648AT-E/ML Applications
There are a lot of Microchip Technology PIC16F648AT-E/ML Microcontroller applications.
- Wastewater treatment
- Virtual reality VR robots
- Projector
- Oil and gas
- Industrial robot
- Industrial instrumentation devices
- Calculators
- DCS control intelligent sensor
- Refrigerators
- Aerospace navigation systems
