PIC16F648AT-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F648A |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F648AT-E/SS Overview
There is a 20-SSOP (0.209, 5.30mm Width) package available to save space. Surface Mount is used for mounting. In the package Tape & Reel (TR), it is included. The device runs in PIC core processor. Maintain a temperature of -40°C~125°C TA while working. Its type of program memory is FLASH. 16 I/Os are present on the device. Based on its base part number of PIC16F648A, other similarly-sized components can be found. The terminals of this device are set to DUAL. It consists of 20 terminationals. The PIC? 16F series includes this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 20 pins are used to construct it. According to Surface Mount, it is mounted. In total, it has 20 pins. It falls under the category of Microcontrollers. A device with a memory size of 7kB can store programs and data. Using a frequency of 20MHz, it is very efficient. There are currently 3 timers/counters set up on the system. It is one of the members of the CPU family PIC. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Internal is the oscillator type it uses.
PIC16F648AT-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F648AT-E/SS Applications
There are a lot of Microchip Technology PIC16F648AT-E/SS Microcontroller applications.
- Current meter
- Switches
- Automatic staplers
- Dryers
- Toasters
- Graphic terminals
- Instrument control
- Fabric
- Smoke alarms
- Leakage current tester
