PIC16F648AT-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F648A |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F648AT-I/SS Overview
For space savings, it is available in the 20-SSOP (0.209, 5.30mm Width) package. Mounted using Surface Mount. It is available in the Tape & Reel (TR) package. With a processor of PIC cores, the device is powered. The temperature should be kept at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. A total of 16 I/Os are present. Based on its base part number of PIC16F648A, other similarly-sized components can be found. DUAL is the position of its terminals on the board. 20 terminationals are present. In the PIC? 16F series, this electrical component is found. It is possible to achieve high efficiency with a 5V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. There are 20 pins used in the construction of this device. During the mounting process, the device is mounted based on the Surface Mount method. It is equipped with 20 pins in total. It belongs to the subcategory Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 7kB. Working at a frequency of 20MHz results in excellent efficiency. A total of 3 timers/counters are present. It is a member of the PIC family of CPUs. In order to maintain normal operation, Vsup must be above 4.5V. It works with an oscillator type Internal.
PIC16F648AT-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F648AT-I/SS Applications
There are a lot of Microchip Technology PIC16F648AT-I/SS Microcontroller applications.
- Sonography (Ultrasound imaging)
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Broadband technology, video and voice processing
- Teletext terminals
- Air fryers
- Robots
- Entertainment-radios, CD players, televisions
- Television
- Medical instruments chromatographs
- Petrochemical
