PIC16F676T-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F676 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F676T-I/ST Overview
As a result, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. Surface Mount is the way to mount it. A package of Tape & Reel (TR) contains it. PIC core processor is present on the device. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory it uses is FLASH. 12 I/Os have been provided by the device. Based on its base part number of PIC16F676, other similarly-sized components can be found. The terminals of this device are located at DUAL. 14 terminationals are present. An electrical component such as this is included in the series PIC? 16F. By using a 5V voltage supply, high efficiency is possible. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. For its construction, 14 pins are used. The mounting of this device is carried out following the method of Surface Mount. On it, there are 14 pins. Microcontrollers contains this component. The devices have a maximum memory size of 1.8kB that can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. It appears that there are 2 timers/counters in use. It is part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) above 4.5V. Using a Internal oscillator type, it works well.
PIC16F676T-I/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F676T-I/ST Applications
There are a lot of Microchip Technology PIC16F676T-I/ST Microcontroller applications.
- Kindle
- Wastewater treatment
- Industrial instrumentation devices
- Routers
- Coffee machines
- Dialysis machines (performs function of liver)
- Digital cameras
- Toys
- Heater/Fan
- Missile control
