PIC16F677-I/SO
| Parameters | |
|---|---|
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F677 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, SSP |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| Nominal Supply Current | 220μA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 2 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of SPI Channels | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
PIC16F677-I/SO Overview
It is available in the 20-SOIC (0.295, 7.50mm Width) package for the benefit of saving space. The way of Surface Mount is used to mount it. Package Tube contains it. A core processor of PIC is present in the device. Working at -40°C~85°C TA temperature is recommended. Its type of program memory is FLASH. There are 18 I/Os on it, which makes it a very simple device. A component with the same part number as PIC16F677 can be compared to other similar components. This device has terminals at DUAL. It consists of 20 terminationals. There are a number of electrical components in the PIC? 16F series, including this one. By using a 5V voltage supply, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. The structure is composed of 20 pins. It is mounted based on the method of Surface Mount. It has a total of 20 pins on it. This is a component included in Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. The system is highly efficient when working at a frequency of 20MHz. A total of 2 timers/counters are present. As part of the PIC CPU family, this component is included. Vsup should be kept above 4.5V for normal operation. Using an oscillator type Internal, it operates.
PIC16F677-I/SO Features
20-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F677-I/SO Applications
There are a lot of Microchip Technology PIC16F677-I/SO Microcontroller applications.
- Routers
- Current meter
- Firewalls
- Fire alarms
- Magnetic resonance imaging (MRI)
- 3D printers
- Dryers
- Medical instruments chromatographs
- Hard drives
- Microwave ovens
