PIC16F677-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F677 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, SSP |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| Nominal Supply Current | 220μA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 2 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of SPI Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F677-I/SS Overview
A space-saving advantage is that it is included in the 20-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. You can find it in the package of Tube. With a processor of PIC cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. FLASH has been assigned to it as a program memory. 18 I/Os are present on the device. In order to find similar components, it has a base part number of PIC16F677. At DUAL, it has its terminals. There are a total of 20 terminations in it. Part of the PIC? 16F series, this electrical component is used in a variety of applications. As a result of the 5V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 20 pins are used. According to Surface Mount, it is mounted. In total, it has 20 pins. Microcontrollers contains this component. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. It performs extremely well at a frequency of 20MHz. The number of timers and counters is 2. As part of the PIC CPU family, this component is included. Normal operation requires a supply voltage (Vsup) above 4.5V. The oscillator type Internal is used to operate the device.
PIC16F677-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F677-I/SS Applications
There are a lot of Microchip Technology PIC16F677-I/SS Microcontroller applications.
- Smoke alarms
- Hard drives
- Multi-meter
- Microwave ovens
- Home appliances
- ECG machine
- DCS control intelligent sensor
- Glucose monitoring systems (for Type 1 Diabetes)
- Toasters
- Printers
