PIC16F677T-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F677 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, SSP |
| Memory Size | 2kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F677T-E/SS Overview
There is a 20-SSOP (0.209, 5.30mm Width) package available to save space. Surface Mount is the way to mount it. It comes in the package?of a Tape & Reel (TR). Device with PIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. A total of 18 I/Os are present. In order to find similar components, it has a base part number of PIC16F677. At DUAL, its terminals are located. 20 terminations are present in it. The PIC? 16F series includes this electrical component. The 5V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. It is constructed using 20 pins. The method of Surface Mount is used to mount it. A total of 20 pins are attached to it. It belongs to the subcategory Microcontrollers. A device with a memory size of 2kB can store programs and data. It is highly efficient when it works at a frequency of 20MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are 2 timers/counters. The part is a part of the PIC CPU family. An oscillator type Internal is required for it to work.
PIC16F677T-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F677T-E/SS Applications
There are a lot of Microchip Technology PIC16F677T-E/SS Microcontroller applications.
- Blood pressure monitors
- Routers
- Dryers
- Smart highways (navigation, traffic control, information monitoring and car service)
- Robots
- Answering machines
- Mice
- Computed Tomography (CT scan)
- Hearing aids
- DCS control intelligent sensor
