PIC16F684T-I/SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F684 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| Nominal Supply Current | 2.8mA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Height | 1.5mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F684T-I/SL Overview
For space savings, it is available in the 14-SOIC (0.154, 3.90mm Width) package. A Surface Mount mounting method is used. It comes in the package?of a Tape & Reel (TR). The device runs in PIC core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 12 I/Os on it. Based on its base part number of PIC16F684, other similarly-sized components can be found. The position of the device is DUAL at terminal. 14 terminationals are present. The PIC? 16F series contains this electrical component. It is possible to achieve high efficiency with a 5V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 14 pins. This mount is done in accordance with the method of Surface Mount. 14 pins are on it in total. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. A 2/5V power source powers it. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 3. It belongs to the PIC CPU family. There is an oscillator type Internal used in this circuit.
PIC16F684T-I/SL Features
14-SOIC (0.154, 3.90mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F684T-I/SL Applications
There are a lot of Microchip Technology PIC16F684T-I/SL Microcontroller applications.
- Robotic prosthetic limbs
- Entertainment products
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Television
- Routers
- Teletext terminals
- Computed Tomography (CT scan)
- Kindle
- Set-top boxes
- Switches
