PIC16F685-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 16F |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 800mW |
| Frequency | 20MHz |
| Base Part Number | PIC16F685 |
| Interface | I2C, SPI, SSP |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| Nominal Supply Current | 220μA |
| Speed | 20MHz |
| RAM Size | 256 x 8 |
| Memory Type | FLASH |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 56 kb |
| Core Architecture | PIC |
| EEPROM Size | 256 x 8 |
| Max Frequency | 20MHz |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F685-I/SS Overview
For the purpose of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. In the package Tube, it is included. PIC core processor is present on the device. When working, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. It has a number of 18I/Os. Other components that are comparable to it have the base part number PIC16F685. The electrical component is part of the series PIC? 16F. In data storage, FLASH is used as the memory type. A total of 20 pins are used in its construction. As a result, it is mounted in accordance with Surface Mount. It is possible to store programs and data on the devices, as they have a memory size of 7kB. Its core architecture is PIC. Working at a frequency of 20MHz results in excellent efficiency. 3 timer/counters are present. 20MHz is the maximum frequency of the device. A temperature lower than 85°C is recommended for operating conditions. It is recommended that the working temperature be greater than -40°C. A chip with 18 programmable inputs/outputs is available. Using a Internal oscillator type, it works well.
PIC16F685-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Minimum temperature of -40°C
PIC16F685-I/SS Applications
There are a lot of Microchip Technology PIC16F685-I/SS Microcontroller applications.
- Projector
- Radio
- Dishwashers
- Entertainment-radios, CD players, televisions
- Heater/Fan
- DDC control
- Volt meter
- Microwave ovens
- Heart rate monitors
- Industrial robot
