PIC16F687-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F687 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F687-E/P Overview
A space-saving advantage is that it is included in the 20-DIP (0.300, 7.62mm) package. Mounted using Through Hole. Package Tube contains it. Device with PIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~125°C TA. FLASH has been assigned to it as a program memory. 18 I/Os can be found on it. In order to find similar components, it has a base part number of PIC16F687. At DUAL, it has its terminals. As far as terminations are concerned, there are 20 terminations present. It is a member of the PIC? 16F series of electrical components. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 20 pins are required to construct this device. Mounting is performed in accordance with Through Hole. A total of 20 pins are attached to it. In Microcontrollers, this component is included. The devices have a maximum memory size of 3.5kB that can be used to store programs and data. This device achieves excellent efficiency at frequencies of 20MHz. While deploying 5V, designers will be able to fully take advantage of its adaptability. It appears that there are 2 timers/counters in use. As part of the PIC CPU family, this component is included. Internal is the oscillator type it uses.
PIC16F687-E/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F687-E/P Applications
There are a lot of Microchip Technology PIC16F687-E/P Microcontroller applications.
- Mice
- Electromechanical control
- Fax machines
- Petrochemical
- ECG machine
- Broadband technology, video and voice processing
- Communication-bluetooth, Wi-Fi, radio
- Mobile computers
- Teletext terminals
- Vacuum cleaners
