PIC16F687-I/ML
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F687 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 2 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 17 |
| Number of ADC Channels | 12 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
PIC16F687-I/ML Overview
Due to its space-saving qualities, it is available in the 20-VFQFN Exposed Pad package. Mounted using Surface Mount. It is available in the Tube package. It is equipped with a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. A total of 18 I/Os are present. Based on its base part number of PIC16F687, other similarly-sized components can be found. The position of the device is QUAD at terminal. It has 20 terminationals. An electrical component such as this is included in the series PIC? 16F. The 5V supply voltage enables high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 20 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. There are a total of 20 pins on it. Microcontrollers contains this component. The devices have a memory size of 3.5kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 20MHz. There are currently 2 timers/counters set up on the system. CPU family PIC comprises the part. There are 17 programmable I/Os in the device. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. There is an oscillator type Internal used in this circuit.
PIC16F687-I/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F687-I/ML Applications
There are a lot of Microchip Technology PIC16F687-I/ML Microcontroller applications.
- Gas monitoring systems
- Broadband technology, video and voice processing
- Industrial instrumentation devices
- PDAs, game consoles
- Switches
- Accu-check
- Projector
- Blenders
- Ipod
- Hand-held metering systems
