PIC16F687-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F687 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| Nominal Supply Current | 220μA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 2 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 12 |
| Number of SPI Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F687-I/SS Overview
It is available in the 20-SSOP (0.209, 5.30mm Width) package for the benefit of saving space. The way of Surface Mount is used to mount it. There is a Tube package available for it. A PIC core processor powers the device. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. 18 I/Os are present on the device. A component with the same part number as PIC16F687 can be compared to other similar components. DUAL is the location of its terminals. It consists of 20 terminationals. The PIC? 16F series contains this electrical component. The 5V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 20 pins are used to construct it. Based on the Surface Mount method, it is mounted. It has a total of 20 pins on it. It falls under the category of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 3.5kB. This device achieves excellent efficiency at frequencies of 20MHz. The number of timers and counters is 2. This part is part of the PIC family of CPUs. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. Internal is the oscillator type it uses.
PIC16F687-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F687-I/SS Applications
There are a lot of Microchip Technology PIC16F687-I/SS Microcontroller applications.
- Sonography (Ultrasound imaging)
- Set-top boxes
- Mobile computers
- Routers
- Toasters
- Digital cameras
- Traditional industrial transformation
- Scanners
- Fax machines
- Ipad
