PIC16F687T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F687 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 17 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F687T-I/ML Overview
To save space, it is included in the 20-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. It comes in the package?of a Tape & Reel (TR). Devices with PIC core processors are available. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. The device has 18 I/Os. A component with the same part number as PIC16F687 can be compared to other similar components. At QUAD, its terminals are located. A 20 termination is contained within it. The PIC? 16F series includes this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 20 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. It is equipped with 20 pins in total. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 3.5kB which may be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. Using 5V's adaptability as a supply voltage allows designers to maximize its use. A total of 2 timers/counters are present. CPU family PIC comprises the part. A chip with 17 programmable inputs/outputs is available. There is an oscillator type Internal used in this circuit.
PIC16F687T-I/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F687T-I/ML Applications
There are a lot of Microchip Technology PIC16F687T-I/ML Microcontroller applications.
- Volt meter
- Scanners
- Xbox
- Smart instruments
- Routers
- Industrial robot
- Computer/laptop
- Home appliances
- Hearing aids
- Projectors
