PIC16F688-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F688 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Number of I2C Channels | 1 |
| Height | 4.953mm |
| Length | 19.69mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F688-E/P Overview
There is a 14-DIP (0.300, 7.62mm) package available to save space. This is mounted using the Through Hole method. A package of Tube contains it. Device with PIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~125°C TA. FLASH has been assigned to it as a program memory. 12 I/Os can be found on it. To find comparable components, use the PIC16F688 base part number. This device has terminals at DUAL. In this case, there are 14 terminationals. PIC? 16F is the series number of this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. It is constructed using 14 pins. This mount is done in accordance with the method of Through Hole. Total number of pins is 14. Microcontrollers contains this component. Data and programs may be stored on the devices which have a memory size of 7kB. When working at a frequency of 20MHz it is able to achieve excellent efficiency. 2 timers/counters are in use. This part is an integral part of the PIC CPU family. A supply voltage (Vsup) above 4.5V is necessary for normal operation. There is an oscillator type Internal used in this circuit.
PIC16F688-E/P Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F688-E/P Applications
There are a lot of Microchip Technology PIC16F688-E/P Microcontroller applications.
- Electrocardiogram (EKG)
- Torpedo guidance
- Heart rate monitors
- Broadband technology, video and voice processing
- Industrial instrumentation devices
- Process control devices
- Paper shredders
- Current meter
- Firewalls
- Removable disks
