PIC16F688-E/ST
| Parameters | |
|---|---|
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F688 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
PIC16F688-E/ST Overview
Due to its space-saving qualities, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. A Surface Mount mounting method is used. In the package Tube, it is included. With a processor of PIC cores, the device is powered. During work, the temperature should remain at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. 12 I/Os can be found on it. Based on the PIC16F688 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 14 terminations present. This electrical component is part of the PIC? 16F series. The 5V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 14 pins are required to construct this device. According to Surface Mount, it is mounted. It is equipped with 14 pins in total. This is a component included in Microcontrollers. The devices have a memory size of 7kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 20MHz. In total, there are 2 timers and counters. PIC CPUs are included in this part. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. An oscillator of type Internal is used.
PIC16F688-E/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F688-E/ST Applications
There are a lot of Microchip Technology PIC16F688-E/ST Microcontroller applications.
- Toasters
- Automatic control
- Fax machines
- Traditional industrial transformation
- Industrial instrumentation devices
- Fire detection & safety devices
- Television
- DDC control
- Dishwashers
- Petrochemical
