PIC16F688T-E/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F688 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F688T-E/ST Overview
As a result, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. The way of mounting it is Surface Mount. It comes in a Tape & Reel (TR) package. A core processor of PIC is present in the device. When working, the temperature should be kept at -40°C~125°C TA. In terms of its program memory type, it is FLASH. There are 12 I/Os on the board. To find equivalent components, use its PIC16F688 base part number. At DUAL, it has its terminals. A 14 termination is contained within it. This electrical component is part of the PIC? 16F series. High efficiency is possible due to the 5V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 14 pins are used in its construction. Based on the Surface Mount method, it is mounted. Total number of pins is 14. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 7kB which may be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. A total of 2 timers/counters are present. This part is an integral part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. Internal is the oscillator type it uses.
PIC16F688T-E/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F688T-E/ST Applications
There are a lot of Microchip Technology PIC16F688T-E/ST Microcontroller applications.
- Printers
- Hard drives
- Xbox
- Temperature sensing and controlling devices
- Toasters
- Missile control
- Hearing aids
- Telephone sets
- Digital TVs
- Set-top boxes
