PIC16F688T-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F688 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F688T-I/ST Overview
For the purpose of saving space, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. A Surface Mount mounting method is used. You can find it in the package of Tape & Reel (TR). PIC core processor is present on the device. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. 12 I/Os have been provided by the device. Based on the PIC16F688 base part number, it can be compared with other components. At DUAL, it has its terminals. A 14 termination is contained within it. The PIC? 16F series includes this electrical component. Using the 5V supply voltage allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 14 pins are used in its construction. Mounting is performed in accordance with Surface Mount. A total of 14 pins are attached to it. It belongs to the subcategory Microcontrollers. Memory size for the devices is 7kB, which can be used to store programs and data. When working at a frequency of 20MHz it is able to achieve excellent efficiency. In total, there are 2 timers and counters. It is a member of the PIC family of CPUs. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. Internal is the oscillator type it uses.
PIC16F688T-I/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F688T-I/ST Applications
There are a lot of Microchip Technology PIC16F688T-I/ST Microcontroller applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Smart instruments
- Process control devices
- X-ray
- Computed Tomography (CT scan)
- Robots
- Hand-held metering systems
- Equipment control
- Fax machines
- DCS control intelligent sensor
