PIC16F689-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F689 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F689-E/P Overview
For the purpose of saving space, it is available in the 20-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. There is a Tube package available for it. The device runs in PIC core processor. When working, the temperature should be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. A total of 18 I/Os are available on this device. A comparable component can be found by using the base part number PIC16F689. DUAL is the position of its terminals on the board. 20 terminations are present in it. The electrical component is part of the series PIC? 16F. Because of the 5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. For its construction, 20 pins are used. During the mounting process, the device is mounted based on the Through Hole method. It is equipped with 20 pins in total. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 7kB which may be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. A total of 2 timers/counters are present. CPU family PIC comprises the part. There is an oscillator type Internal used in this circuit.
PIC16F689-E/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F689-E/P Applications
There are a lot of Microchip Technology PIC16F689-E/P Microcontroller applications.
- Removable disks
- Speed meter
- Printers
- Hand-held metering systems
- Toasters
- Traditional industrial transformation
- Electronic jamming systems
- 3D printers
- Wastewater treatment
- Set-top boxes
