PIC16F689T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F689 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Voltage | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F689T-I/SS Overview
For space savings, it is available in the 20-SSOP (0.209, 5.30mm Width) package. Mounted using Surface Mount. A package of Tape & Reel (TR) contains it. A core processor of PIC is present in the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 18I/Os. A component with the same part number as PIC16F689 can be compared to other similar components. At DUAL, its terminals are located. It has 20 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. It is possible to achieve high efficiency with a 5V supply voltage. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. There are 20 pins used in the construction of this device. The mounting of this device is carried out following the method of Surface Mount. A total of 20 pins are attached to it. In Microcontrollers, this component is included. In the device, there is a memory capacity of 7kB which may be used to store programs and data. It is highly efficient when it works at a frequency of 20MHz. 5V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 2 timers/counters are present. The part is a part of the PIC CPU family. It works with an oscillator type Internal.
PIC16F689T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F689T-I/SS Applications
There are a lot of Microchip Technology PIC16F689T-I/SS Microcontroller applications.
- Toys
- Digital cameras
- DCS control intelligent sensor
- Blood pressure monitors
- Mobile computers
- Fax machines
- Radio
- Industrial instrumentation devices
- Petrochemical
- Missile control
