PIC16F690-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F690 |
| Pin Count | 20 |
| Operating Supply Voltage | 5.5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 256B |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| Nominal Supply Current | 220μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 56 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Height | 1.85mm |
| Length | 7.493mm |
| Width | 5.588mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F690-I/SS Overview
A space-saving advantage is that it is included in the 20-SSOP (0.209, 5.30mm Width) package. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Tube. PIC core processor is present on the device. When working, the temperature should be kept at -40°C~85°C TA. Its type of program memory is FLASH. There are 18 I/Os on it. It has a base part number of PIC16F690 that can be used to find other components that are comparable. DUAL is the location of its terminals. It has 20 terminationals. In the PIC? 16F series, this electrical component is found. Because the supply voltage is 5V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A number of 20 pins are used to construct it. As a result, it is mounted in accordance with Surface Mount. In total, it has 20 pins. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 256B. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. Designers can fully utilize the supply voltage of 5.5V's adaptability while employing it. 3 timer/counters are present. It is a member of the PIC family of CPUs. Internal is the oscillator type it uses.
PIC16F690-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F690-I/SS Applications
There are a lot of Microchip Technology PIC16F690-I/SS Microcontroller applications.
- Robots
- Refrigerators
- Volt meter
- Industrial robot
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Hearing aids
- Removable disks
- Mice
- Wastewater treatment
- Firewalls
