PIC16F707-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F707 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 363 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 3.2mA |
| Bit Size | 8 |
| Data Converter | A/D 14x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F707-E/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. Surface Mount is used for mounting. Package Tube contains it. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~125°C TA. Memory type FLASH is used for program memory. 36 I/Os are present on the device. Based on its base part number of PIC16F707, other similarly-sized components can be found. QUAD is the position of its terminals on the board. It has 44 terminationals. Part of the PIC? XLP? mTouch? 16F series, this electrical component is used in a variety of applications. The 3.3V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 44 pins are required to construct this device. In total, it has 44 pins. The component is included in Microcontrollers. Using the devices' 14kB memory size, you can store programs and data. The maximum supply current is set at 3.2mA. It is powered by a 2/5V?source. At a frequency of 20MHz, it exhibits excellent efficiency. 6 timers/counters are in use. This part is an integral part of the PIC CPU family. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.5V. Using an oscillator type of Internal, it works.
PIC16F707-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F707-E/ML Applications
There are a lot of Microchip Technology PIC16F707-E/ML Microcontroller applications.
- Telephone sets
- Calculator
- Projectors
- Entertainment products
- Oil and gas
- Glucose monitoring systems (for Type 1 Diabetes)
- Electromechanical control
- Hearing aids
- Light sensing & controlling devices
- Smartphones-calling, video calling, texting, email
