PIC16F716T-I/SO
| Parameters | |
|---|---|
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 28kB |
| Oscillator Type | External |
| Number of I/O | 13 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 4x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERTES AT 2 V MINIMUM SUPPLY @ 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F716 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
PIC16F716T-I/SO Overview
A space-saving advantage is that it is included in the 18-SOIC (0.295, 7.50mm Width) package. It is mounted using the way of Surface Mount. Tape & Reel (TR) is the package that contains it. A PIC core processor powers the device. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. There are 13 I/Os on it. A comparable component can be found by using the base part number PIC16F716. The terminals of this device are located at DUAL. A 18 termination is contained within it. The electrical component is part of the series PIC? 16F. Because the supply voltage is 5V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A number of 18 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. On it, there are 18 pins. It is one of the components included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 28kB. A 2.5/5V source of power is being used to run it. It performs extremely well at a frequency of 20MHz. 3 timers/counters are in use. PIC CPUs are included in this part. It has the property of OPERTES AT 2 V MINIMUM SUPPLY @ 4 MHZ as well. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. The oscillator type External is used to operate the device.
PIC16F716T-I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F716T-I/SO Applications
There are a lot of Microchip Technology PIC16F716T-I/SO Microcontroller applications.
- Binding machines
- Communication-bluetooth, Wi-Fi, radio
- DCS control intelligent sensor
- Walkie talkies
- Tape drives
- Washing machines
- Set-top boxes
- Hand-held metering systems
- Refrigerators
- Teletext terminals
