PIC16F722A-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 20MHz |
| Base Part Number | PIC16F722A |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Number of USB Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F722A-E/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. It is available in the Tube package. The device has a PIC core processor. Work should be done at -40°C~125°C TA. FLASH is its program memory type. There are 25 I/Os on it, which makes it a very simple device. A component with the same part number as PIC16F722A can be compared to other similar components. A DUAL position is assigned to its terminals. It has 28 terminationals. This electrical component is part of the PIC? XLP? 16F series. Because the supply voltage is 3.3V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is constructed from 28 pins. There are 28 pins on it. It belongs to the subcategory Microcontrollers. A device with a memory size of 3.5kB can store programs and data. Working at a frequency of 20MHz results in excellent efficiency. There are currently 3 timers/counters set up on the system. It is one of the members of the CPU family PIC. Internal is the oscillator type it uses.
PIC16F722A-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F722A-E/SP Applications
There are a lot of Microchip Technology PIC16F722A-E/SP Microcontroller applications.
- Robotic prosthetic limbs
- Hard drives
- Fire alarms
- Tape drives
- Sonography (Ultrasound imaging)
- Removable disks
- DCS control intelligent sensor
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Refrigerators
- Calculator
