PIC16F726-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 20MHz |
| Base Part Number | PIC16F726 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | I2C, SCI, SPI, SSP, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| Nominal Supply Current | 450μA |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 112 kb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F726-I/SP Overview
Due to the benefits of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. This is mounted using the Through Hole method. It is available in the Tube package. With a processor of PIC cores, the device is powered. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. The device has 25 I/Os. To find comparable components, use the PIC16F726 base part number. The terminals of this device are set to DUAL. It consists of 28 terminationals. There are a number of electrical components in the PIC? XLP? 16F series, including this one. Because the supply voltage is 3.3V, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A total of 28 pins are required to construct this device. This mount is done in accordance with the method of Through Hole. It is equipped with 28 pins in total. The component is included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 14kB. The system is highly efficient when working at a frequency of 20MHz. A total of 3 timers/counters are present. PIC CPUs are included in this part. Using an oscillator type of Internal, it works.
PIC16F726-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F726-I/SP Applications
There are a lot of Microchip Technology PIC16F726-I/SP Microcontroller applications.
- Fabric
- Instrument control
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Current meter
- Computed Tomography (CT scan)
- Digital TVs
- Toys
- Computers and laptops-video calling, email, blogging
- Microwave ovens
- Entertainment products
