PIC16F74T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F74 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 192 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 8x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F74T-I/PT Overview
To save space, it is included in the 44-TQFP package. It is mounted using the way of Surface Mount. Tape & Reel (TR) is the package that contains it. It is equipped with a PIC core processor. When working, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. There are 33 I/Os on it. To find equivalent components, use its PIC16F74 base part number. QUAD is the position of its terminals on the board. 44 terminations are present in it. The PIC? 16F series includes this electrical component. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 44 pins are used to construct it. The method of Surface Mount is used to mount it. 44 pins are on it in total. This component is a part of Microcontrollers. In the device, there is a memory capacity of 7kB which may be used to store programs and data. There is a maximum current supply of 15mA. There is 5V power source in this device. The system is highly efficient when working at a frequency of 20MHz. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. 3 timers/counters are in use. It is one of the members of the CPU family PIC. An oscillator type External is required for it to work.
PIC16F74T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F74T-I/PT Applications
There are a lot of Microchip Technology PIC16F74T-I/PT Microcontroller applications.
- Blood pressure monitors
- Sonography (Ultrasound imaging)
- Christmas lights
- Electrocardiogram (EKG)
- Toasters
- Electromechanical control
- Removable disks
- Ipad
- Fire alarms
- Microwave ovens
