PIC16F76-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F76 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| Height Seated (Max) | 1.98mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F76-E/SS Overview
Due to its space-saving qualities, it is available in the 28-SSOP (0.209, 5.30mm Width) package. Mounted using Surface Mount. You can find it in the package of Tube. There is a PIC as core processor in this device. Work should be done at -40°C~125°C TA. There is FLASH program memory in it. There are 22 I/Os on the board. In order to find similar components, it has a base part number of PIC16F76. At DUAL, it has its terminals. It has 28 terminationals. The electrical component is part of the series PIC? 16F. By using a 5V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. There are 28 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. 28 pins are on it in total. Using the devices' 14kB memory size, you can store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. There are currently 3 timers/counters set up on the system. An oscillator of type External is used.
PIC16F76-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
PIC16F76-E/SS Applications
There are a lot of Microchip Technology PIC16F76-E/SS Microcontroller applications.
- Equipment control
- Digital cameras
- Volt meter
- Firewalls
- Fabric
- DDC control
- Leakage current tester
- Home video and audio
- Information appliances (networking of household appliances)
- Answering machines
