PIC16F767-E/ML
| Parameters | |
|---|---|
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 5mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F767 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
PIC16F767-E/ML Overview
It is available in the 28-VQFN Exposed Pad package for the benefit of saving space. Mounted using Surface Mount. You can find it in the package of Tube. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~125°C TA. In terms of its program memory type, it is FLASH. A total of 25 I/Os are present. It has a base part number of PIC16F767 that can be used to find other components that are comparable. At QUAD, it has its terminals. In this case, there are 28 terminationals. There are a number of electrical components in the PIC? 16F series, including this one. The 5V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 28 pins are used to construct it. Based on the Surface Mount method, it is mounted. 28 pins are on it in total. It falls under the category of Microcontrollers. Memory size for the devices is 14kB, which can be used to store programs and data. There is a maximum current supply of 5mA. It performs extremely well at a frequency of 20MHz. Using 5V's adaptability as a supply voltage allows designers to maximize its use. A total of 3 timers/counters are present. This part is part of the PIC family of CPUs. There is an oscillator type Internal used in this circuit.
PIC16F767-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F767-E/ML Applications
There are a lot of Microchip Technology PIC16F767-E/ML Microcontroller applications.
- Equipment control
- Copiers
- Petrochemical
- X-ray
- Entertainment products
- Hard drives
- DCS control intelligent sensor
- Torpedo guidance
- Home video and audio
- Sonography (Ultrasound imaging)
