PIC16F76T-I/SS
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F76 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 5x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.98mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
PIC16F76T-I/SS Overview
For the purpose of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. It is mounted using the way of Surface Mount. A package of Tape & Reel (TR) contains it. It is equipped with a PIC core processor. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 22 I/Os can be found on it. Based on its base part number of PIC16F76, other similarly-sized components can be found. DUAL is the location of its terminals. A 28 termination is contained within it. An electrical component such as this is included in the series PIC? 16F. The 5V supply voltage enables high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 28 pins. It is mounted based on the method of Surface Mount. There are a total of 28 pins on it. It falls under the category of Microcontrollers. Data and programs can be stored on the devices with a memory size of 14kB. The maximum supply current is set at 15mA. A 5V source of power is being used to run it. At a frequency of 20MHz, it can achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. There are 3 timers/counters. CPU family PIC comprises the part. It works with an oscillator type External.
PIC16F76T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F76T-I/SS Applications
There are a lot of Microchip Technology PIC16F76T-I/SS Microcontroller applications.
- Broadband technology, video and voice processing
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Virtual reality VR robots
- Washing machines
- Current meter
- Industrial instrumentation devices
- Fax machines
- Automatic control
- X-ray
- Oil and gas
