PIC16F77-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F77 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| Nominal Supply Current | 900μA |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 112 kb |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 4.064mm |
| Length | 52.4256mm |
| Width | 14.224mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F77-I/P Overview
For space savings, it is available in the 40-DIP (0.600, 15.24mm) package. In this case, it is mounted using the method of Through Hole. It comes in a Tube package. Devices with PIC core processors are available. The temperature should be kept at -40°C~85°C TA while working. FLASH is its program memory type. The device has 33 I/Os. It has a part number of PIC16F77 that can be used to locate similar components. The terminals are positioned at DUAL. As far as terminations are concerned, there are 40 terminations present. An electrical component such as this is included in the series PIC? 16F. The 5V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. The structure is composed of 40 pins. This mount is done in accordance with the method of Through Hole. It has a total of 40 pins on it. The devices have a maximum memory size of 14kB that can be used to store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. It appears that there are 3 timers/counters in use. Normally, the supply voltage (Vsup) should remain above 4V. Using an oscillator type of External, it works.
PIC16F77-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
PIC16F77-I/P Applications
There are a lot of Microchip Technology PIC16F77-I/P Microcontroller applications.
- Multi-meter
- Glucose monitoring systems (for Type 1 Diabetes)
- Calculator
- Leakage current tester
- Missile control
- Electromechanical control
- DCS control intelligent sensor
- Tape drives
- Process control devices
- Hand-held metering systems
