PIC16F77-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F77 |
| Pin Count | 44 |
| Lead Pitch | 500μm |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| Nominal Supply Current | 900μA |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x8b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 112 kb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 1.05mm |
| Length | 10.1mm |
| Width | 10.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F77-I/PT Overview
A space-saving advantage is that it is included in the 44-TQFP package. It is mounted using the way of Surface Mount. It comes in a Tray package. It is equipped with a PIC core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. The device has 33 I/Os. A comparable component can be found by using the base part number PIC16F77. The terminals of this device are located at QUAD. As far as terminations are concerned, there are 44 terminations present. This electrical component is part of the PIC? 16F series. High efficiency is possible due to the 5V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The structure is constructed from 44 pins. It is mounted based on the method of Surface Mount. There are a total of 44 pins on it. This component is a part of Microcontrollers. Using the devices' 14kB memory size, you can store programs and data. A 5V power source powers it. The system is highly efficient when working at a frequency of 20MHz. The number of timers and counters is 3. This part is an integral part of the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 4V. An oscillator of type External is used.
PIC16F77-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F77-I/PT Applications
There are a lot of Microchip Technology PIC16F77-I/PT Microcontroller applications.
- Measuring revolving objects
- Multi-meter
- Set-top boxes
- 3D printers
- Heart rate monitors
- DVD\DV\MP3 players
- Entertainment-radios, CD players, televisions
- Accu-check
- Heater/Fan
- Computers and laptops-video calling, email, blogging
