PIC16F777T-I/PT
| Parameters | |
|---|---|
| Number of I/O | 36 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 4.2mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F777 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
PIC16F777T-I/PT Overview
Due to the benefits of saving space, it is available in the 44-TQFP package. It is mounted using the way of Surface Mount. Tape & Reel (TR) is the package that contains it. There is a PIC as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 36 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number PIC16F777. The position of the device is QUAD at terminal. In this case, there are 44 terminationals. PIC? 16F is the series number of this electrical component. As a result of the 5V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is composed of 44 pins. There are a total of 44 pins on it. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. It should be noted that 4.2mA represents the maximum supply current. Working at a frequency of 20MHz results in excellent efficiency. While deploying 5V, designers will be able to fully take advantage of its adaptability. A total of 3 timers/counters are present. As part of the PIC CPU family, this component is included. An oscillator type Internal is required for it to work.
PIC16F777T-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F777T-I/PT Applications
There are a lot of Microchip Technology PIC16F777T-I/PT Microcontroller applications.
- Industrial robot
- Paper shredders
- DCS control intelligent sensor
- Keyboards
- Petrochemical
- Teletext terminals
- Kindle
- Multi-meter
- Mobile computers
- Accu-check
