PIC16F84A-04I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | PIC16F84A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Memory Size | 1.8kB |
| Oscillator Type | External |
| Number of I/O | 13 |
| RAM Size | 68 x 8 |
| Memory Type | FLASH, RAM |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Supply Current-Max | 4.5mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Density | 14 kb |
| EEPROM Size | 64 x 8 |
| CPU Family | PIC |
| Height | 4.953mm |
| Length | 23.368mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F84A-04I/P Overview
There is an option to purchase it in the 18-DIP (0.300, 7.62mm) package, which saves space. This is mounted using the Through Hole method. It is available in the Tube package. Devices with PIC core processors are available. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. The device has 13 I/Os. It has a part number of PIC16F84A that can be used to locate similar components. The terminals of this device are set to DUAL. 18 terminationals are present. It is a member of the PIC? 16F series of electrical components. Because of the 5V voltage of the supply, high efficiency can be achieved. As a storage type for data, FLASH, RAM is used. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The structure is constructed from 18 pins. The method of Through Hole is used to mount it. It has a total of 18 pins on it. Subcategory Microcontrollers includes this component. Memory size for the devices is 1.8kB, which can be used to store programs and data. Supply current cannot exceed 4.5mA. A 5V power source powers it. This device works well at 4MHz frequency when it is operating at a high rate of efficiency. A total of 1 timers/counters are present. It belongs to the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 4V. Using a External oscillator type, it works well.
PIC16F84A-04I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F84A-04I/P Applications
There are a lot of Microchip Technology PIC16F84A-04I/P Microcontroller applications.
- Magnetic resonance imaging (MRI)
- Laminators
- Guidance-GPS
- Information appliances (networking of household appliances)
- Security systems
- Mice
- Sonography (Ultrasound imaging)
- Television
- Fire alarms
- Playstation
