PIC16F84A-20I/P
| Parameters | |
|---|---|
| Number of Terminations | 18 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F84A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 1.8kB |
| Oscillator Type | External |
| Number of I/O | 13 |
| Nominal Supply Current | 2mA |
| RAM Size | 68 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Address Bus Width | 8b |
| Density | 14 kb |
| EEPROM Size | 64 x 8 |
| CPU Family | PIC |
| Height | 3.68mm |
| Length | 22.99mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
PIC16F84A-20I/P Overview
For space savings, it is available in the 18-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. This item can be found in package Tube. Devices with PIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. The device has 13 I/Os. To find comparable components, use the PIC16F84A base part number. This device has terminals at DUAL. A 18 termination is contained within it. An electrical component such as this is included in the series PIC? 16F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. For its construction, 18 pins are used. The method of Through Hole is used to mount it. This device has a total of 18 pins. In Microcontrollers, this component is included. The devices have a maximum memory size of 1.8kB that can be used to store programs and data. There is 5V power source in this device. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 1 timers/counters are in use. PIC CPUs are included in this part. Normally, the supply voltage (Vsup) should remain above 4.5V. An oscillator type External is required for it to work.
PIC16F84A-20I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F84A-20I/P Applications
There are a lot of Microchip Technology PIC16F84A-20I/P Microcontroller applications.
- Heart rate monitors
- Oscilloscopes
- X-ray
- Equipment control
- Fabric
- Leakage current tester
- Hearing aids
- Radio
- Calculator
- Industrial instrumentation devices
