PIC16F870-E/SP
| Parameters | |
|---|---|
| Height Seated (Max) | 4.06mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F870 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 64 x 8 |
| On Chip Program ROM Width | 14 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 128 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 10 |
| On Chip Data RAM Width | 8 |
PIC16F870-E/SP Overview
For space savings, it is available in the 28-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. Package Tube contains it. Device with PIC core processor issupported. When working, it is recommended that the temperature be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. 22 I/Os are present on the device. A comparable component can be found by using the base part number PIC16F870. At DUAL, its terminals are located. There are a total of 28 terminations in it. An electrical component such as this is included in the series PIC? 16F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. There are 28 pins used in the construction of this device. The mounting of this device is carried out following the method of Through Hole. It is equipped with 28 pins in total. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 3.5kB. It is important to note that the maximum supply current is 15mA. There is 5V power source in this device. At a frequency of 20MHz, it exhibits excellent efficiency. When 5V is employed, designers can fully utilize its adaptability and supply voltage. The number of timers and counters is 3. Using oscillator type External makes it work.
PIC16F870-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F870-E/SP Applications
There are a lot of Microchip Technology PIC16F870-E/SP Microcontroller applications.
- Switches
- Process control devices
- Volt meter
- Computed Tomography (CT scan)
- Hard drives
- Computers and laptops-video calling, email, blogging
- Set-top boxes
- Safety -airbags, automatic braking system (ABS)
- DCS control intelligent sensor
- Blood pressure monitors
