PIC16F870-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F870 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| Nominal Supply Current | 1.6mA |
| RAM Size | 128 x 8 |
| Memory Type | EEPROM, FLASH |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 28 kb |
| EEPROM Size | 64 x 8 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 128 |
| Number of ADC Channels | 5 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 10 |
| Number of PWM Channels | 1 |
| Height | 3.43mm |
| Length | 35.18mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F870-I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. Mounted using Through Hole. It comes in a Tube package. A PIC core processor powers the device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 22 I/Os are available on this device. Based on the PIC16F870 base part number, it can be compared with other components. DUAL is the location of its terminals. This circuit consists of 28 terminationals. PIC? 16F is the series number of this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. Storage of data is performed using memory type EEPROM, FLASH. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 28 pins are required to construct this device. Mounting is performed in accordance with Through Hole. In total, it has 28 pins. The component is included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 3.5kB. There is 5V power source in this device. It performs extremely well at a frequency of 20MHz. There are 3 timers/counters. Normal operation requires a supply voltage (Vsup) that is higher than 4V. An oscillator type External is required for it to work.
PIC16F870-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F870-I/SP Applications
There are a lot of Microchip Technology PIC16F870-I/SP Microcontroller applications.
- Wastewater treatment
- Fax machines
- Digital set-top boxes
- Ipad
- Electrocardiogram (EKG)
- Hand-held metering systems
- Robots
- Removable disks
- Robotic prosthetic limbs
- Fire alarms
