PIC16F871-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F871 |
| Pin Count | 40 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 128 x 8 |
| Memory Type | EEPROM, FLASH |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Density | 28 kb |
| EEPROM Size | 64 x 8 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 128 |
| Number of ADC Channels | 8 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 11 |
| Number of PWM Channels | 1 |
| Height | 4.06mm |
| Length | 52.45mm |
| Width | 14.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F871-I/P Overview
For space savings, it is available in the 40-DIP (0.600, 15.24mm) package. The way of Through Hole is used to mount it. It comes in a Tube package. With a processor of PIC cores, the device is powered. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. A total of 33 I/Os are present. To find comparable components, use the PIC16F871 base part number. At DUAL, it has its terminals. This circuit consists of 40 terminationals. The electrical component is part of the series PIC? 16F. The supply voltage of 5V allows for high efficiency. EEPROM, FLASH is its memory type for data storage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 40 pins are required to construct this device. The mounting of this device is carried out following the method of Through Hole. It has a total of 40 pins on it. Microcontrollers contains this component. In order to store data and programs, the devices have a memory size of 3.5kB. Power is provided by a 5V source. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 3. Vsup should be kept above 4V for normal operation. External is the oscillator type it uses.
PIC16F871-I/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F871-I/P Applications
There are a lot of Microchip Technology PIC16F871-I/P Microcontroller applications.
- DDC control
- Kindle
- Aerospace navigation systems
- Microwave ovens
- Air fryers
- Paper shredders
- Leakage current tester
- Toasters
- Digital set-top boxes
- Digital TVs
