PIC16F873A-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 4 V MINIMUM SUPPLY |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F873A |
| Pin Count | 28 |
| Power Supplies | 5V |
| Interface | I2C, SPI, SSP, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| Nominal Supply Current | 1.6mA |
| RAM Size | 192 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 56 kb |
| ROM (words) | 4096 |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 5 |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Height | 3.43mm |
| Length | 35.18mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F873A-I/SP Overview
There is an option to purchase it in the 28-DIP (0.300, 7.62mm) package, which saves space. The way of Through Hole is used to mount it. In the package Tube, it is included. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. FLASH is its program memory type. There are 22 I/Os on the board. A component with the same part number as PIC16F873A can be compared to other similar components. At DUAL, it has its terminals. 28 terminations are present in it. The electrical component is part of the series PIC? 16F. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. For its construction, 28 pins are used. During the mounting process, the device is mounted based on the Through Hole method. There are 28 pins on it. It belongs to the subcategory Microcontrollers. Using the devices' 7kB memory size, you can store programs and data. Power is provided by a source of 5V. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 3 timers/counters are in use. It is one of the members of the CPU family PIC. There is also the property of OPERATES AT 4 V MINIMUM SUPPLY. It works with an oscillator type External.
PIC16F873A-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F873A-I/SP Applications
There are a lot of Microchip Technology PIC16F873A-I/SP Microcontroller applications.
- Data acquisition and control
- Projector
- Toasters
- Computers and laptops-video calling, email, blogging
- Guidance-GPS
- Laminators
- Heater/Fan
- Printers
- Current meter
- Calculators
