PIC16F874A-E/L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F874A |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 192 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F874A-E/L Overview
As a result, it is available in the 44-LCC (J-Lead) package. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Tube. PIC core processor is present on the device. Work should be performed at a temperature of -40°C~125°C TA. In terms of its program memory type, it is FLASH. 33 I/Os can be found on it. To find comparable components, use the PIC16F874A base part number. At QUAD, its terminals are located. It consists of 44 terminationals. This electrical component is part of the PIC? 16F series. Because of the 5V voltage of the supply, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 44 pins are used to construct it. The method of Surface Mount is used to mount it. A total of 44 pins are attached to it. The component is included in Microcontrollers. Supply current cannot exceed 15mA. There is 5V power source in this device. It performs extremely well at a frequency of 20MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs. There are 3 timers/counters. It belongs to the PIC CPU family. Using oscillator type External makes it work.
PIC16F874A-E/L Features
44-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F874A-E/L Applications
There are a lot of Microchip Technology PIC16F874A-E/L Microcontroller applications.
- Instrument control
- Data acquisition and control
- Automatic staplers
- Smart highways (navigation, traffic control, information monitoring and car service)
- Leakage current tester
- Speed meter
- Microwave ovens
- PDAs, game consoles
- Switches
- Dishwashers
