PIC16F876AT-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F876A |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Length | 10.2108mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F876AT-E/SS Overview
To save space, it is included in the 28-SSOP (0.209, 5.30mm Width) package. It is mounted using the way of Surface Mount. It is available in the Tape & Reel (TR) package. Device with PIC core processor issupported. Working at -40°C~125°C TA temperature is recommended. It has a type of program memory of FLASH. The device has 22 I/Os. A component with the same part number as PIC16F876A can be compared to other similar components. At DUAL, it has its terminals. It has 28 terminationals. It is a member of the PIC? 16F series of electrical components. By using a 5V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A number of 28 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. It is equipped with 28 pins in total. The component is included in Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. In this case, 15mA represents the maximum current supply. A 5V source of power is being used to run it. It performs extremely well at a frequency of 20MHz. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. A total of 3 timers/counters have been set up. It is a member of the PIC family of CPUs. Using an oscillator type of External, it works.
PIC16F876AT-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F876AT-E/SS Applications
There are a lot of Microchip Technology PIC16F876AT-E/SS Microcontroller applications.
- Mobile computers
- Equipment control
- Ipad
- Fire detection & safety devices
- Electronic jamming systems
- Temperature sensing and controlling devices
- Blenders
- Projectors
- Television
- Walkie talkies
