PIC16F876AT-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 4 V MINIMUM SUPPLY |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F876A |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.98mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F876AT-I/SS Overview
There is a 28-SSOP (0.209, 5.30mm Width) package available to save space. The way of Surface Mount is used to mount it. In the package Tape & Reel (TR), it is included. The device has a PIC core processor. Maintain a temperature of -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 22 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number PIC16F876A. A DUAL position is assigned to its terminals. It consists of 28 terminationals. In the PIC? 16F series, this electrical component is found. The supply voltage of 5V allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A number of 28 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. There are a total of 28 pins on it. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. In this case, 15mA represents the maximum current supply. A 5V source of power is being used to run it. It performs extremely well at a frequency of 20MHz. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. A total of 3 timers/counters are present. CPU family PIC comprises the part. The property OPERATES AT 4 V MINIMUM SUPPLY is also present in it. There is an oscillator type External used in this circuit.
PIC16F876AT-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F876AT-I/SS Applications
There are a lot of Microchip Technology PIC16F876AT-I/SS Microcontroller applications.
- Industrial robot
- Ipod
- Accu-check
- Temperature sensing and controlling devices
- Projector
- Playstation
- Dryers
- Ipad
- Light sensing & controlling devices
- Aerospace navigation systems
