PIC16F877-04E/L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F877 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 4mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F877-04E/L Overview
Due to its space-saving qualities, it is available in the 44-LCC (J-Lead) package. This is mounted using the Surface Mount method. You can find it in the package of Tube. With a processor of PIC cores, the device is powered. Working at -40°C~125°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. The device has 33 I/Os. It has a part number of PIC16F877 that can be used to locate similar components. At QUAD, it has its terminals. There are a total of 44 terminations in it. In the PIC? 16F series, this electrical component is found. Because of the 5V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 44 pins are required to construct this device. There are a total of 44 pins on it. It falls under the category of Microcontrollers. Data and programs can be stored on the devices with a memory size of 14kB. The maximum supply current is set at 4mA. A 5V source of power is being used to run it. This device achieves excellent efficiency at frequencies of 4MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs. There are 3 timers/counters. This part is an integral part of the PIC CPU family. There is an oscillator type External used in this circuit.
PIC16F877-04E/L Features
44-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F877-04E/L Applications
There are a lot of Microchip Technology PIC16F877-04E/L Microcontroller applications.
- Switches
- Hand-held metering systems
- Measuring revolving objects
- Embedded gateways
- Information appliances (networking of household appliances)
- Missile control
- Smart highways (navigation, traffic control, information monitoring and car service)
- Petrochemical
- Calculator
- Heater/Fan
