PIC16F877-10E/PQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F877 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F877-10E/PQ Overview
Due to its space-saving qualities, it is available in the 44-QFP package. A Surface Mount mounting method is used. In the package Tray, it is included. With a processor of PIC cores, the device is powered. Work should be performed at a temperature of -40°C~125°C TA. FLASH is the type of program memory used by it. 33 I/Os are present on the device. A component with the same part number as PIC16F877 can be compared to other similar components. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 44 terminations present. This electrical component is part of the PIC? 16F series. Because the supply voltage is 5V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 44 pins are used to construct it. It has a total of 44 pins on it. In the subcategory of Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 14kB. 15mA is the maximum supply current. It is powered by a 5V?source. At a frequency of 10MHz, it can achieve excellent efficiency. A designer is able to make full use of the adaptability and supply voltage of 5V by using it. The number of timers and counters is 3. The part is a part of the PIC CPU family. The oscillator type External is used to operate the device.
PIC16F877-10E/PQ Features
44-QFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F877-10E/PQ Applications
There are a lot of Microchip Technology PIC16F877-10E/PQ Microcontroller applications.
- Keyboards
- Accu-check
- Heater/Fan
- Oil and gas
- Pacemakers (used to control abnormal heart rhythm)
- Electromechanical control
- Computer/laptop
- Oscilloscopes
- Aerospace navigation systems
- Industrial instrumentation devices
