PIC16F877T-20I/PQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F877 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 33 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 20mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F877T-20I/PQ Overview
Due to the benefits of saving space, it is available in the 44-QFP package. This is mounted using the Surface Mount method. It is available in the Tape & Reel (TR) package. A core processor of PIC is present in the device. Working at -40°C~85°C TA temperature is recommended. FLASH is its program memory type. The device has 33 I/Os. To find equivalent components, use its PIC16F877 base part number. The terminals of this device are located at QUAD. As far as terminations are concerned, there are 44 terminations present. An electrical component such as this is included in the series PIC? 16F. As a result of the 5V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. 44 pins are used to construct it. Total number of pins is 44. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. In this case, 20mA represents the maximum current supply. It is powered by a 5V?source. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. Designers can fully utilize the supply voltage of 5V's adaptability while employing it. 3 timers/counters are in use. PIC CPUs are included in this part. Using a External oscillator type, it works well.
PIC16F877T-20I/PQ Features
44-QFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F877T-20I/PQ Applications
There are a lot of Microchip Technology PIC16F877T-20I/PQ Microcontroller applications.
- Speed meter
- Switches
- Security systems
- DCS control intelligent sensor
- DDC control
- Smoke alarms
- Radio
- Television
- Medical instruments chromatographs
- Embedded gateways
